Mercury Mariner Outboard 225 3 Litre Service Manual 1994, Page 37Get this manual

Mercury Mariner Outboard 225 3 Litre Service Manual 1994, Page 37

Installation
THROTTLE POSITION SENSOR
Removal
Secure sensor to bracket with boltTorque bolt to 50 lbin(5.6 Nm)
Remove top cowlingDisconnect sensor harness
2Secure bracket to powerhead with bolts NOTE: Position brackeVsensor assembly to allow .040 .in .020 in (1.02mm 0.51mm) air gap between sensor and flywheel teethTorque bracket bolts to 100 lbin(11 .3 Nm)

aSensor Harness Connector
Remove screws securing sensor to bracket
aAir Gap [.040 in .020 in(1.02mm .51mm)]

Back to Mercury Mariner Outboard 225 3 Litre Service Manual 1994