Mercury Mariner 30/40 4-Stroke Outboard Service Manual 1998, Page 109Get this manual

Mercury Mariner 30/40 4-Stroke Outboard Service Manual 1998, Page 109

CHARGING 8STA RTING SYSTEM
6Place springs and brushes into brush holder and hold in place with brush retainer tool7Lubricate bushing with one drop of SAE tOW oilDO NOT over-lubricate
aBrush Retainer ToolBushing 8Position armature into starter frame so that commutator end of armature is at end of starter frame where permanent magnets are recessed in(25.4mm)Align marks (a) as shown9Install commutator end cap onto starter frame; align marks (b) as shown, and remove brush retainer tool10Instali thru bolts (c) and torque to 70 Ibsin(7.9 Nm)

Back to Mercury Mariner 30/40 4-Stroke Outboard Service Manual 1998