Mercury Mariner 30/40 4-Stroke Outboard Service Manual 1998, Page 81Get this manual

Mercury Mariner 30/40 4-Stroke Outboard Service Manual 1998, Page 81

IGNITION
Stator Removal and Installation
1Remove stator harness from j-clips
2Remove cable tie from bundled wi re connectors3Disconnect stator wires4Remove stator mounting bolts5 Reverse steps for installation (refer to wiring diagram Section 20 for correct stator wire connections)NOTE: Apply Loctite 222 to threads of stator screws

Back to Mercury Mariner 30/40 4-Stroke Outboard Service Manual 1998