Mercury Mariner 200, 225 Optimax Outboards Service Manual, 90-855348, Page 353Get this manual
Bearing Carrier Assembly REMOVAL
bRemove the bearing carrier retainer using the Bearing Carrier Retainer Wrench (91-61069)
1Straighten the tab on the tab washer
70490Tab on Tab Washer
aBearing Carrier Retainer Wrench
2Remove the bearing carrier retainer following step or as follows:
3Pull the bearing carrier from the gear housing by pulling on the outer ring of the bearing carrierPOSITION PULLER JAWS CLOSE TO BOSSES IN CARRIERNOTE: If the bearing carrier is seized in the gear housing, it may be necessary to use heat to loosen the carrier