Mercury Mariner 200, 225 Optimax Outboards Service Manual, 90-855348, Page 291Get this manual
15Position mount on each lower side of drive shaft housing 16Install flat washer over each lower mounting
bolt17Start upper mounting bolts in upper mounts and align lower mounting bolts with holes in swivel pin yokeSlide drive shaft housing up against yoke and bumper
21Install lower mount retainers and secure each retainer with bolts(Secure ground strap with the nearest retainer bolt and flat washer Torque bolts to 20 lbft(27.0 Nm)
18Secure upper mounts to steering arm with flat washers and self-locking nutsTorque nuts to 50
lbft(68.0 Nm)19Install ground strap between port lower mount bolt and swivel bracket20Secure lower mounts to swivel pin yoke with selflocking nutsTorque nuts to 90 lbft(122.0 Nm)Place rubber cap over each lower mounting bolt head