Mercury Mariner 200, 225 Optimax Outboards Service Manual, 90-855348, Page 36Get this manual
Painting Procedures CleaningPainting Aluminum PropellersGear Housings
Avoid serious injury from flying debrisAvoid serious injury from airborne particlesUse eye and breathing protection with proper ventilationPROPELLERS
1Sand the entire area to be painted with 3M 120 Regalite Polycut or coarse Scotch-Brite, disc or belts2Feather edges of all broken paint edgesTry not to sand through the primer3Clean the surface to be painted using PPG Industries DX330 Wax and Grease Remover or equivalent (Xylene or M.E.K4If bare metal has been exposed, use Quicksilver's Light Gray Primer5Allow minimum of hour dry time and no more than week before applying the finish coat6Apply the finish coat using Quicksilver's EDP Propeller Black