Mercury Mariner 200, 225 Optimax Outboards Service Manual, 90-855348, Page 13Get this manual
Lubrication Points Item No1 Description Throttle Shift Linkage Pivot Points Upper Shift Shaft Tilt Lock Lever Swivel Pin Ride Guide Steering Cable Tilt Tube Steering Link Rod Pivot Points Trim Rod Ball Ends SAE 30W Motor Oil 100 Hours of Use or Once in SeasonUpper Shift Shaft LubricationTilt Lock Lever Grease FittingSwivel Pin Grease Fittings Type of Lubricant 2-4-C wTeflon Fresh Water Frequency Salt Water Frequency
100 Hours of Use or Once in Season
RIDE-GUIDE STEERING CABLE AND PIVOT POINTS LUBRICATION
2-4-C wTeflon Anti-Corrosion Grease 2-4-C wTeflon 2-4-C wTeflon
100 Hours of Use or Once in Season
Core of steering cable (transom end) must be fully retracted into cable housing before lubricating cableIf cable is lubricated while extended, hydraulic lock of cable could occurWith core of Ride-Guide Steering cable (transom end) fully retractedlubricate transom end of steering cable thru grease fitting and exposed portion of cable end with Quicksilver 2-4-C wTeflonLubricate all pivot points with SAE 30W engine oil