Mercury Force 9.9, 15HP Outboards Service Manual, Page 76Get this manual
PINSTALLING BREAKER POINTS 1Position breaker poi nts on stator plale 2Install two screws and lead (A)
NOTE: Do not tighten screws (A)
3Connect three leads to breaker point terminal (8) Secure with nut (C)
4Check cam wiper felt for sufficient lubric ant by squeezing between fingersIf dry, work small amount of lubricant (Special Tool NoFT -2961into felt with fingersIMPORTANT Do not over-lubricate feltExcessive lubricant causes point failure