2005+ Mercury Verado 4 Stroke 200/225/250/275 6 gear housing Service Manual, Page 111Get this manual
Left Hand Rotation 6If roller bearing in bearing adapter must be replaced, remove bearing from adapter using Bearing Removal ToolAlign the pins of the tool with slots of the adapter and apply force to the center of the tool so that the pressure is equal on both of the pinsDiscard the bearing after removal aBearing Removal ToolRoller bearing
cBearing adapter
IBearing Removal Tool
91 -816245
7Reassemble the adapter as follows: aLubricate the bore that the roller bearing is pressed into with 2-4-C with TeflonbInstall the roller bearing into the adapter with the numbered end of the bearing facing the driver shouldercPress the roller bearing into the adapter using Bearing Removal Tool until the Bearing Removal Tool contacts the adapter