2001 Mercury Mariner 50-60HP Factory Service Manual, Page 308Get this manual
CLAMPSWIVEL BRACKETSDRIVE SHAFT HOUSING
Adaptor Plate Reassembly
1If removed during cleaninginspection, install adaptor plate components per the above diagramTighten fasteners to specified torquePickup HoseGasket Bolt Torque 75 lb-in(38 Nm) Oil Pressure Relief Valve Torque (Oiled) 17 lb-ft(23 Nm) 1Place adaptor plate on to driveshaft housing, install bolts on the aftunderside of the driveshaft housing and tighten to specified torque