1997+ Mercury 35/40HP 2 Cylinder Outboards Service Manual PN 90-826148R2, Page 273Get this manual
4Disconnect link rod from cam lever5R emove tilt lock pinR emove nuts and washers securing the lower pivot pinR emove anode bolt to remove ground strapR emove lower anchor pinR etain the anchor pin bushings from the clamp brackets and trim unit6R emove trim unit Manual Trim System Installation
1Apply 2-4-C Marine Lubricant (92-90018A12) to surface of lower anchor pin and anchor pin holePlace trim into proper positionInstall anchor pin and bushings into anchor pin hole and clamp bracketsInstall nuts and washers to anchor pin and tighten securelyInstall ground strap and anode bolt2Install tilt lock pin