1997+ Mercury 35/40HP 2 Cylinder Outboards Service Manual PN 90-826148R2, Page 265Get this manual
Power Trim System Installation 1Lubricate lower pivot pin, mounting holes and bushings with 2-4-C Marine Lubricant2Install lower pivot pin bushings into the clamp brackets and trim unit
4Install sacrificial anode to clamp bracketsFasten ground strap between anode and clamp bracketTorque bolts to 60 lbin(6.8 Nm)
aGround WireSacrificial Anode
5Lubricate the upper pivot pin and mounting holes with 2-4-C Marine Lubricant6Fasten shock rod with the upper pivot pinaBushing (2) Install into each Clamp BracketBushing (2) Install into each side of Trim Unit