1996 Mercury Force 25 HP Service Manual 90-830894 895, Page 47Get this manual
Inspecting and Installing Reed Valve 1Inspect reeds for any chipping or cracking 2Inspect reed openingMaximum opening is 0.003 in(0.076 mm)If reed opening is more than dimension mentioned replace reed NOTE: The reed stop opening is not adjustable
Reed Reed Stop Screw Reed Block
NOTE: The reed valve opening is not adjustableMaxopening is 0.003 in(0.078 mm)
3Clean all gasket surfaces4Install reeds and reed stops on reed plate5Install NEW manifold and reed plate gasketsSecure assembly to cylinder block6Install seven screws securing assembly to cylinder block and tighten securely7Install recirculating hoses on fittings on manifold8Install carburetorSEE CARBURETOR SECTION FOR MORE INFORMATION