1995 Mariner Mercury Outboards Service Manual 50HP 4-Stroke, Page 53Get this manual
Starter Motor Reassembly 1Place washers on the armature shaft2Place armature shaft into front bracket
4Install stator onto the front bracketAlign Projection with cut in the coverNOTE: Make sure stator is installed so magnets are positioned correctly
aWasher (Fiber) .08 in(2.0 mm) ThickWasher .04 in(1.0 mm) ThickWashers (Use as Required) (Adjust Washers Until 0.05 0.010 in(0.050.25 mm) Axial Play Exist on the Armature ShaftFront Bracket
1Install the pinion, spring, and pinion stopper onto starter shaft2Place clrclip into groove on shaft3Press the pinion stopper over the circlipIMPORTANT: Install new circlip for reassembly