1988-1992 Mercury Force 5HP Outboards Service Manual, Page 150Get this manual

1988-1992 Mercury Force 5HP Outboards Service Manual, Page 150

GINSTALLING CYLINDER HEAD 1Install cylinder head Place cylinder head gasket on cylinder head, aligning holes and water passage bridgingsPlace cylinder head and gasket on cylinderInstall screws with washers (top two) and bracket (lower two)Torque to 130 inIbs(149 kgcm)

NOTE: Torque head screws in sequence to 50 inIbs(57 kgcm)Then increase in 25 inlb(29 kgcm) steps to specified torque to prevent cylinder head from warping

Back to 1988-1992 Mercury Force 5HP Outboards Service Manual