1986+ Mercury 6/8/9.9/10/15HP 2-stroke Factory Service Manual, Page 252Get this manual

1986+ Mercury 6/8/9.9/10/15HP 2-stroke Factory Service Manual, Page 252

GEAR HOUSING
Propeller Shaft and Bearing Carrier Installation
1Install REVERSE gear into bearing carrier2If not previously lubricated, apply 2-4-C with Teflon to o-ring3Apply 2-4-C with Teflon to bearing carrier threads and pilot diameter4Slide bearing carrier onto propeller shaft and install entire assembly into gear housing5Torque bearing carrier to 115.2 Nm (85 lbft using Bearing Carrier Tool (91-13664)

Back to 1986+ Mercury 6/8/9.9/10/15HP 2-stroke Factory Service Manual