1986+ Mercury 6/8/9.9/10/15HP 2-stroke Factory Service Manual, Page 191Get this manual

1986+ Mercury 6/8/9.9/10/15HP 2-stroke Factory Service Manual, Page 191

POWERHEAD
141996 Models and prior: Apply 2-4-C with Teflon to rubber seal (to prevent seal from moving out of position) and secure intake manifoldreed block (with new gasket) using boltsALL Models: Torque bolts to 6.8 Nm (60 lbin

aBolts [Torque to 6.8 Nm (60 lb in]Intake manifoldreed block 151994 Models: Secure intake cover (with new gasket) using bolts1995 Models and newer: Inspect O-rings on intake cover for cuts or abrasionsReplace if necessarySecure cover with boltsTorque bolts to 6.8 Nm (60 lbin

Back to 1986+ Mercury 6/8/9.9/10/15HP 2-stroke Factory Service Manual