1986+ Mercury 6/8/9.9/10/15HP 2-stroke Factory Service Manual, Page 162Get this manual

1986+ Mercury 6/8/9.9/10/15HP 2-stroke Factory Service Manual, Page 162

POWERHEAD
Powerhead Disassembly
Cylinder Block
1Remove bolts and remove intake manifoldreed block

aBoltsIntake manifoldreed block IMPORTANT: Reed block can be inspected without disassemblingRefer to Cleaning and Inspection, followingIf inspection of reed block indicates that replacement of part is necessary, disassemble reed block as outlined2If necessary, disassemble reed block as follows: aPull ends of rubber seal from holes in intake manifoldreed blockbRemove screws and separate reed stops and reeds1994 1996 Reed Blocks

Back to 1986+ Mercury 6/8/9.9/10/15HP 2-stroke Factory Service Manual