1986+ Mercury 6/8/9.9/10/15HP 2-stroke Factory Service Manual, Page 132Get this manual
FUEL DELIVERY SYSTEM
2Reconnect bleed hose to fitting on carburetor and install carburetor and secure carburetor to engine with hex nuts3Secure fuel line to carburetor with cable-tie4Reconnect link wire to fast idle lever
aLink wireFast idle lever 5Push down on primer arm and insert primer knob, bezel and slide block into primer assembly6Tighten screw to secure slide block in place7Align notch in back side of bezel with tab on bottom cowl and secure bezel in place with retaining clip