Johnson Evinrude Outboard Motors 1956-1970 1.5-40hp repair manual., Page 359Get this manual
ATOP FLYWHEEL WITH SPRINGS 4- Lay the starter on its back on work surfaceRemove the three screws securing the pawl retainers to the pulleyRemove the three pawl springs, as shownIn the illustration, two springs have already been removed and the third is being removed5- Remove the three pawls from their retainersRemove the center screw from the hubHold the pulley, and at the same irrielift the spindle and pin assembly, then the equalizer cup, and friction spring, from the pulleyWARNING The rewind spring is potential hazardThe spring is under tremendous tension when it is wound real tiger in cageIf the spring should accidently be released, severe personal injury could result from being struck by the spring with forceTherefore, the following step MUST be performed with care to prevent personal injury to self and others in the areaIf the spring should be accidently released at the wrong ime, such action would be BAD SCENE, very BAD SCENE, because serious personal injury could result6- Lift the pulley straight up and at the same time work the spring free of the