Johnson Evinrude Outboard Motors 1956-1970 1.5-40hp repair manual., Page 306Get this manual
LOWER UNIT
the shift rod to move it up or down until the clutch dog is in the center between the forward and reverse gears9- Lay down bead of No1000 Sealer into the groove of the cap in preparation to installing the seal10- Place NEW seal in the lower cap and hold the seal in the groove with sealerApply small amount of silicone sealer on each side of the bearing gear case headThis sealer will form complete seal when the lower unit cap is installedPosition the lower unit cap over the gear assembly onto the lower unit housing11- Apply drop of sealer into the opening for each cap retaining screw to ensure complete seal between the cap and the lower unit housingInstall the screws securing the cap to the lower unit housingTighten the screws ALTERNATELY and EVENLY
GOOD WORD