Johnson Evinrude Outboard Motors 1956-1970 1.5-40hp repair manual., Page 228Get this manual
ELECTRICAL
DISASSEMBLING 2- Observe the caps and find the identifying mark or boss on eachIf the marks are not visible, make an identifying mark prior to removing the thru-bolts as an essential aid during asemblingRemove the thrubolts from the bracket and the starter motor3- Use small hammer and CAREFULLY tap the lower cap free of the starter motor4- Pull on the armature shaft from the drive gear end and remove it from the field frame assemblyRemove the brushes from their holders, and then remove the brush springsLift the white plastic retainer free from the frameObserve the location of the notch on the retainer in relation to the frameThe retainer must be installed in the same positionARMATURE TESTING