Johnson Evinrude Outboard Motors 1956-1970 1.5-40hp repair manual., Page 225Get this manual
AUTOLITE STARTER position to reach the brush holdersDo not overheat the leads, because the solder will run onto the lead and the lead will loose its flexibilityCheck to be sure none of the soldered connections are touching the frameThe fields would be grounded if the connections make contact with the frameNegative Brush Installation 12- Cut the old brush free from the end capClean the surface thoroughlyNext, solder the lead of the new brush to the end capIf the retainer are no longer fi for service, the entire end cap must be replacedNew brushes are NOT included with the end capCLEANING AND INSPECTING