Johnson Evinrude Outboard Motors 1956-1970 1.5-40hp repair manual., Page 214Get this manual
ELECTRICAL present, the starter solenoid and MUST be replacedis defective
b- If voltage is present-at No.6, connect voltmeter at No.3 and to No.7Connect one end of jumper wire to No.2, the positive terminal of the battery and MOMENTARIL make contact with the other end at No.6, the starter solenoidIf voltage is indicated through the starter solenoid, the solenoid is satisfactory and the problem has been corrected while making the testsSometimes, when working with electrical circuits, corrective action has been taken almost accidently, bad connection has been made good, etcIf the solenoid test falled, it does not necessarily mean the solenoid is defectiveThe solenoid may not be properly grounded through the cutout switchTherefore, the cutout switch may be defective and should be checked as outlined later in this sectionc- With the voltmeter still connected at No3 and No.7, connect one end of jumper wire at No.8, the starter solenoid, and the other lead to good groundConnect second jumper wire at No.2, the positive terminal of the battery, to No.6, the starter solenoidThe voltmeter should indicate voltage is presentIf voltage is not