Johnson Evinrude Outboard Motors 1956-1970 1.5-40hp repair manual., Page 114Get this manual
through the tube and around the spring, the spring expands and releases its pressure on the chokeAlso notice how the spring is attached to the choke leverThe spring is attached to plunger which actuates the electr ical part of the choke system5- Remove the two screws securing the electr ic choke solenoid to the carburetorRemove the solenoid and take care to retain the spring inside the solenoidRemove the choke solenoid gasket
6- Using pair of needle-nose pliers, reach inside the choke base and remove the spring from the choke leverLower the spring and plunger from the carburetorFurther disassembly of the combination heatelectrical choke is not necessaryIf the choke is to be assembled without rebuilding the carburetor, proceed directly to Section 4-8If the carburetor is to be rebuilt at this time, proceed to Section 4-7