Johnson Evinrude Outboard Motors 1956-1970 1.5-40hp repair manual., Page 105Get this manual
JE CARBURETORS
Gasket used between the bowl and the carburetor showing the opening to allow fuel to leave the bowl and enter the idle passage of the carburetor
11- Remove the five attaching screws, and then lift the bowl free of the carburetor12- Remove the hinge pin and lift the float from the carburetor bowl cavityAs the float is lifted from the carburetor, observe the small spring attached to the needle, The needle will come out with the float assemblyRemove the needle seat from the carburetorGOOD WORDS Further disassembly of the carburetor is not necessaryThe nozzle in the center of the carburetor does NOT have to be removed in order to properly clean the carburetorHowever, the nozzle can be removed with screwdriver if it is damaged and needs to be replaced