2008 Evinrude E-TEC 55MFE Technical Manual, Page 211Get this manual
POWERHEAD POWERHEAD INSTALLATION Place the shift rod in the shift rod leverInstall the retaining pin and washerTighten pin to torque of 60 to 84 inlbs(7 to 9.5 Nm)Connect cooling water hoses to exhaust housing
1Overboard indicator hose 2Drain hose 1Shift rod screw 002171
Check shift linkage adjustmentRefer to Shift Linkage Adjustment on p211
Connect exhaust water valve connectorSecure cables in clampsInstall recoil starter ratchet and housing on outboardRefer to RECOIL STARTER INSTALLATION on p275