2008 Evinrude E-TEC 55MFE Technical Manual, Page 205Get this manual
POWERHEAD POWERHEAD ASSEMBLY setting (one line showing)Rotate adjustment knob 180 to lock in position
Tighten forcing screw until jaws contact connecting rod Slide frame down until adjustment stop contacts the rod capThe groove lines on the jaws must be centered on the rodcrankpin diameter Tighten the forcing screw to torque of 14 to 16 inlbs(1.6 to 1.8 Nm)
1Center position, one line showing 002484
Secure restraining jaw "C" and forcing jaw "D" to frame
Contact area of jaw Forcing screw Adjustment stop Groove line