2008 Evinrude E-TEC 55MFE Technical Manual, Page 169Get this manual
OILING SYSTEM OILING SYSTEM TESTS
Oil Injection Pump Circuit Resistance Test
IMPORTANT: The complete oil injection pump
electrical circuit includes EMM alternator output, the engine wire harness, the injection pump winding and connectors, and the oil injector control circuit of the EMMCheck continuity of all wiring and connectionsDisconnect the battery cables at the batteryUse an appropriate test probe to make connection to pin of the oil injection pump connectorCalibrate digital multimeter to the LOW OHMS scale and measure the resistance between pin 23 of the EMM J1-B connector and pin of the oil injection pump connectorOil Injection Pump Circuit Resistance 22
Oil Injection Pump Function Test
Remove oil distribution hose from fitting at oil distribution manifoldDo not lose the brass hose support
1Oil distribution hose 2Hose support
Temporarily install length of oil hose