2008 Evinrude E-TEC 55MFE Technical Manual, Page 63Get this manual
MAINTENANCE LUBRICATION
Throttle and Shift Linkage
Disconnect the battery cables at the batteryRemove clips and washers from throttle and shift lever pinsCarefully, remove throttle and shift cable casing guides from pins
Propeller Shaft
Debris from the water can become lodged around propeller shaftFrequent inspection can minimize potential gearcase damage
WARNING
When servicing the propeller, always shift the outboard to NEUTRAL, twist and remove all spark plug leads so the outboard cannot be started accidentallyRemove propellerRefer to Propeller Hardware Installation on p44Inspect bushing and blade surfacesReplace damaged or worn propellersClean propeller shaftInspect propeller shaft sealsReplace damaged or worn sealsApply Triple-Guard grease to entire length of propeller shaft prior to installing propellerReinstall propeller hardware and propeller
IMPORTANT: DO NOT disturb cable trunnion