2008 Evinrude E-TEC 55MFE Technical Manual, Page 10Get this manual
INTRODUCTION SERVICE SPECIFICATIONS
MFE 55 Models
ELECTRICAL
Minimum Battery Requirements Alternator Tachometer Setting Engine Fuse Thermostat Maximum Temperature Water pressure Type Firing Order Ignition Timing (with Electric Start Kit) 640 CCA (800 MCA) or 800 CCA (1000 MCA) below 32 (0 C) 55-Amp, system current 25-Amp, available for battery charging pulse (12 pole) PN 967545 10 143F (62C) 212F (100C) 11 psi minimum 5000 RPM Capacitor Discharge 1-2 EMM Controlled 6250 1800 Fixed Refer to Emission Control Information Label Champion QC10WEP 0.028 .003 in(0.76 mm) 12:32 (.375) HPF XR Gearcase Lube 22 floz(650 ml) 21.38 (543 mm) one-half turn 1.125 to 1.330 in(28.6 to 33.8 mm) measured between NEUTRAL and FORWARD