2007 Johnson 2 HP 4-Stroke Service Manual, Page 134Get this manual

2007 Johnson 2 HP 4-Stroke Service Manual, Page 134

GEARCASE ASSEMBLY Apply ThreeBond 1207B sealant on the outer surface of water pump sleeveInstall the water pump sleeve into the water pump case by confirming the boss on the sleeve should be meeting with the groove on the pump caseInstall the water pump case while rotating the driveshaft clockwise in order to flex the impeller vanes in the correct directionTighten the water pump case bolts to torque of 3.5 ftlbs(5 Nm)

Back to 2007 Johnson 2 HP 4-Stroke Service Manual