2007 Johnson 2 HP 4-Stroke Service Manual, Page 104Get this manual
POWERHEAD INSTALLATION
Flywheel
Install the flywheel magnetoRefer to Flywheel on p60Tighten the flywheel nut to the specified torque: 32.5 ftlbs(45 Nm)
Final Assembly Check
Perform the following checks in order to ensure proper and safe operation of the outboard All parts removed have been returned to the original positions Midsection gear engagement is properly adjustedRefer to GEAR SHIMMING AND ADJUSTMENT on p135 All fuel hoses and wirings are correctly routedRefer to WIREHOSE ROUTING on p145 No water leakage is evident during final test running No fuel leakage is evident