2007 Johnson 2 HP 4-Stroke Service Manual, Page 103Get this manual

2007 Johnson 2 HP 4-Stroke Service Manual, Page 103

POWERHEAD INSTALLATION
INSTALLATION
Installation is reverse order of removal with special attention to the following stepsInstall the two dowel pins and gasket on the driveshaft housing
Secure the powerhead to the lower cover and tighten the four bolts to the specified torque: 6.0 ftlbs(8 Nm)

Install the powerheadlower cover assembly onto the driveshaft housing1Dowel pin (2) 2Gasket 006005

Back to 2007 Johnson 2 HP 4-Stroke Service Manual