2007 Johnson 2 HP 4-Stroke Service Manual, Page 97Get this manual

2007 Johnson 2 HP 4-Stroke Service Manual, Page 97

POWERHEAD CYLINDERCRANKCASEPISTON IMPORTANT: When installing the spacer, do not allow the ends to overlap in the grooveincorrect

Ring Gap Direction
Position the piston rings so the ring gaps are staggered at approximately 90 degree anglesMark

correct

First Ring and Second Ring Apply engine oil to the piston ringsInstall the second ring and the first ring to the piston with the "R" mark toward the piston head side
First ring Second ring Oil ring lower side rail Oil ring upper side rail

Back to 2007 Johnson 2 HP 4-Stroke Service Manual