2007 Johnson 2 HP 4-Stroke Service Manual, Page 44Get this manual

2007 Johnson 2 HP 4-Stroke Service Manual, Page 44

MAINTENANCE LUBRICATION Pour recommended oil into oil filler opening, then install filler cap
Gearcase Lubricant
IMPORTANT: Always check the fill level of the
gearcase lubricant prior to removing drainfill plugA tie strap can be used to check lubricant level
Recommended oil: EvinrudeJohnson Ultra 4-Stroke oil, or SAE 10W-40, API classification SE, SF, SG,
Oil amount: Oil change only: 0.33 Qt(0.38 L)
Start the engine and allow it to run for several minutes at idle speedTurn off engine and wait for approximately two minutesCheck oil levelOil level window

Back to 2007 Johnson 2 HP 4-Stroke Service Manual