2007 Johnson 2 HP 4-Stroke Service Manual, Page 19Get this manual
SERVICE SPECIFICATIONS AND SPECIAL TOOLS STANDARD TORQUE SPECIFICATIONS
Tightening Torque General Bolt
IMPORTANT: These values apply only when specific torque for specific fastener is not listed in the
appropriate sectionWhen tightening two or more screws on the same part, DO NOT tighten screws completely, one at timeITEM THREAD DIAM5 mm mm mm 10 mm mm mm mm 10 mm mm mm mm 10 mm TIGHTENING TORQUE Nm kg-ft lb-ft 24 0.2 0.4 1.5 3.0 47 0.4 0.7 3.0 5.0 10 16 1.0 1.6 7.0 11.5 22 35 2.2 3.5 16.0 25.5 24 0.2 0.4 1.5 3.0 10 0.6 1.0 4.5 7.0 15 20 1.5 2.0 11.0 14.5 34 41 3.4 4.1 24.5 29.5 36 0.3 0.6 2.0 4.5 12 0.8 1.2 6.0 8.5 18 28 1.8 2.8 13.0 20.0 40 60 4.0 6.0 29.0 43.5