2007 Evinrude E-Tec 75, 90 HP outboards Service Manual, Page 253Get this manual
MIDSECTION STERN BRACKET Install the tilt limit switch and retainer on the swivel bracketTorque screws to 40 to 50 inlbs(4.5 to 5.7 Nm)
Coat the bushings and seal lips with TripleGuard grease1Tilt limit switch 2Retainer 30758
3076530764
Coat tilt tube bushings with Triple-Guard grease and, if removed, install them in the swivel bracket
Route the trim sender wires through the braided tube, and install the sender unit in the port stern bracket