2007 Evinrude E-Tec 75, 90 HP outboards Service Manual, Page 145Get this manual
ELECTRICAL AND IGNITION ELECTRIC STARTER SERVICING
ELECTRIC STARTER SERVICING
Removal
IMPORTANT: Do not clean the starter drive
while the starter motor and drive are installed on the powerheadThe cleaning agent could drain into the starter motor, washing dirt from the drive into the starter bearings and commutatorDisconnect the battery cables at the batteryRemove port side lower motor coverRefer to Powerhead REMOVAL on p205Disconnect battery positive (+) cable from post on starterRemove the three screws from the starter