2007 Evinrude E-Tec 75, 90 HP outboards Service Manual, Page 66Get this manual
INSTALLATION AND PREDELIVERY FINAL ADJUSTMENTS
FINAL ADJUSTMENTS
Tilt Limit Switch Adjustment
WARNING
If the outboard does not clear all boat parts when tilted fully or turned side to side, safety related parts could be damaged in the course of such outboard movementInjuries could result from loss of boat controlAdjust the tilt limit switch on all new outboard installationsCheck the clearance between outboard(s) and the boat's motor well and transom areaTilt outboard(s) to highest point of clearance and turn the steering system lock to lockIf the outboard contacts the boat's motor well when fully tilted, adjust the tilt limit cam to reduce full-tilt position
Use the trimtilt switch and trim the outboard IN all the wayRotate the LOWER adjustment tab UP to reduce the maximum tiltRotate the UPPER adjustment tab DOWN to increase the maximum tilt position