2007 Evinrude E-Tec 75, 90 HP outboards Service Manual, Page 59Get this manual
INSTALLATION AND PREDELIVERY FUEL AND OIL PRIMING
Oil Requirements
IMPORTANT: Failure to follow these recommendations could void the outboard warranty if lubrication-related failure occursEvinrudeJohnson XD100, XD50, or XD30 outboard oil is recommended for use in Evinrude ETEC outboardsEvinrudeJohnson XD100 outboard oil is preferred for use in Evinrude E-TEC modelsIf these oils are not available, you must use an oil that meets NMMA TC-W3 certification
Powerhead oil programming labels are provided to identify EMM oil programmingInstall the correct label to alert user to specific oil requirements
Engine Lubricant Below 32F (0C)
If the outboard will be operated in temperatures below freezing (32F, 0C), use EvinrudeJohnson XD100
1Evinrude Johnson XD30 outboard lubricant (TC-W3) 002507 YELLOW label 2Evinrude Johnson XD100 outboard lubricant (Premium) BLUE label
Oil Injection Rate
If the owner desires, the Engine Management Module (EMM) on Evinrude E-TEC models can be programmed for the exclusive use of XD100, which will significantly reduce oil consumption