2007 Evinrude E-Tec 75, 90 HP outboards Service Manual, Page 42Get this manual
INSTALLATION AND PREDELIVERY BOAT RIGGING Protective SleeveConduit Make sure all cables, wiring, and hoses have been identified and fitted to the appropriate lengthsNext, locate appropriate shielding to protect the components that route to the outboardAn expandable "flexweave" sleeve or flexible conduit may be used to bundle the cables together as they enter the lower motor coverAll EvinrudeJohnson outboards are shipped with lower motor cover grommet
Fuel Hose
Route the fuel supply hose with adequate slack to allow for the primer bulb to be held with the arrow pointing "up" during useThe fuel hose routing could be the only hose routed outside of the protective sleeve or conduitElectric primers or manual primers may not require this consideration Route fuel hoses from boat fuel system to outboard with adequate slack Install the primer bulb with the arrow pointing in the direction of fuel flow to the outboard Connect the fuel supply hose from the fuel tank to the fuel supply line at the outboard