2007 Evinrude E-Tec 75, 90 HP outboards Service Manual, Page 19Get this manual
SERVICE SPECIFICATIONS AND SPECIAL TOOLS TECHNICAL DATA
75 90 HP E-TEC Models
ELECTRICAL
Minimum Battery Requirements Alternator Tachometer Setting Engine Fuse Maximum Temperature Thermostat Water pressure Type Firing Order Ignition Timing 640 CCA (800 MCA) or 800 CCA (1000 MCA) below 32 (0 C) 25-Amp fully regulated pulse (12 pole) PN 967545 10 200F (94C) 143F (62C) 16 psi minimum 5000 RPM Capacitor Discharge 1-2-3 EMM Controlled 6250 1800 Fixed Refer to Emission Control Information Label Champion QC12PEPB 0.030 .003 in(0.76 mm) 20 in(L) Models: 13:26 (.500) 25 in(X) Models: 12:27 (.444) HPF XR Gearcase Lube 20 in(L) Models: 31.6 floz(935 ml) 25 in(X) Models: 32.8 floz(970 ml) 20 in(L) Models: 21.25 (539.75 mm) one-half turn 25 in(X) Models: 26.25 (666.75 mm) one-half turn 1.125 to 1.330 in(28.6 to 33.8 mm) measured between NEUTRAL and FORWARD Single Piston SystemEvinrudeJohnson Biodegradable TNT Fluid 21 floz(620 ml) to 15 16 to 65 2:1 2.25:1