2006 SD Johnson 4 Stroke 9.9-15HP Outboards Service Manual, Page 30Get this manual
INSTALLATION AND PREDELIVERY BOAT RIGGING
Battery Installation
Each outboard requires its own starting batterySelect battery that meets or exceeds the minimum requirements
Install starwasher on the threaded battery postStack cables from the outboard, then cables from accessoriesFinish this connection with hex nut
Minimum 12 Volt Battery Recommendations
360 CCA (465 MCA), 50 amp-hr minimum
Location and Preparation
Proper installation will prevent battery movement while underway Secure all batteries in protected locations Position battery as close to the outboard as possible Battery location must provide access for periodic maintenance Use battery mounting trays or battery boxes on all battery installations Connections and terminals must be covered with an insulator Battery connections must be clean and free from corrosion Read and understand the safety information supplied with the battery before installation
Marine Style Battery Post 1StalWasher 2Hex nut 3Terminal Insulator