2006 Johnson SD 30 HP 4 Stroke Outboards Service Manual, PN 5006592, Page 233Get this manual
POWER TRIM AND TILT PTT MOTOR
PTT MOTOR
Removal
Place the lower mounting eye of the PTT unit in viseTighten the vise only enough to secure the PTT unitDO NOT overtighten the vise
WARNING
To avoid personal injury, wear eye protection and set compressed air pressure to less than 25 psi (172 kPa)
IMPORTANT: Before removing the motor from the PTT unit, wash the outside of the unit with stiff bristle brush and hot, soapy water to remove sand or dirtDry the unit with compressed airFirst, remove the PTT unit from the engineRefer to "POWER TRIM AND TILT (PTT) UNIT" on page 229Unscrew the reservoir plug and drain the PTT motor oil into suitable container12PTT unit Vise