2006 Johnson SD 30 HP 4 Stroke Outboards Service Manual, PN 5006592, Page 232Get this manual
POWER TRIM AND TILT POWER TRIM AND TILT (PTT) UNIT Position the PTT unit between the stern bracketsInstall and tighten the tilt tube nut to torque of 31 ftIbs(43 Nm)Operate the PTT motor to extend the tilt cylinder rodAlign the tilt cylinder rod with the hole in the swivel bracket as the tilt rod extends
1Stern bracket 2Tilt tube nut
1Bushings (2)
Apply Nut Lock to the threads of the tilt cylinder shaft boltsInstall and tighten the bolts to torque of 16.5 ftIbs(23 Nm)
WARNING
When removing or installing any type of retaining rings, wear eye protection to avoid personal injuryApply Triple-Guard grease to the tilt rod upper shaft, then insert the shaft through the swivel bracket and the tilt cylinder rodSecure the tilt rod upper shaft with the E-ring1Tilt cylinder shaft bolts (2)