2006 Johnson SD 30 HP 4 Stroke Outboards Service Manual, PN 5006592, Page 211Get this manual
GEARCASE BEARING AND SEAL REMOVAL
Shift Rod Disassembly
Remove the stop from the shift rod guide
BEARING AND SEAL REMOVALfor damage while in placeIf bearing is removed for any reason, it must be replaced
IMPORTANT: Inspect bearings
Propeller Shaft Bearing Housing Seals
Use an oil seal remover or 2-jaw puller and plate assembly, PIN 432131 to remove two (2) oil seals from the propeller shaft bearing housing 1Shift rod guide stop
Remove and discard the O-ring
Remove the cam pin and separate the shift rod cam from the shift rodRemove the spacer and the magnet from the shift rodRemove the shift rod pin, then remove the guide and the boot from the shift rodRemove and discard the O-rings1O-ring