2006 Johnson SD 30 HP 4 Stroke Outboards Service Manual, PN 5006592, Page 192Get this manual
MIDSECTION STERN BRACKETS, STEERING ARM, AND SWIVEL BRACKET
Installation
IMPORTANT: An insulation washer must be
installed between the bonding wire terminal and the stern bracketAttach the bonding wire to the port side stern bracketTighten the screw securelyApply Triple-Guard grease to the tilt tube and the bushingsInsert both bushings into the swivel bracketInstall the stern brackets and the tilt tube to the swivel bracket
Install the tilt tube nutLeave the nut loose for easier installation of the PTT unit (or the tilt assist cylinder)Install the PTT unit (or the tilt assist cylinder) between the stern bracketsTighten the tilt tube nut to torque of 32 ftIbs(43 Nm)1