2006 Johnson SD 30 HP 4 Stroke Outboards Service Manual, PN 5006592, Page 128Get this manual
POWERHEAD REMOVAL AND INSTALLATION Connect the clutch rod to the shift rodTighten the locknut and the turnbuckleFor models with power trim and tilt (PTT) unit, install the PTT motor relay and bracketSecure the bracket with the bolts1
1Locknut
1Bolts (3)
Install the oil level dipstick guide and the boltInstall the electric parts holder and two (2) boltsInstall the power pack, then connect all engine wiring harness connectors to the power packConnect the water hose to the thermostat cover and the engine holder1 -= 1