2006 Johnson SD 30 HP 4 Stroke Outboards Service Manual, PN 5006592, Page 32Get this manual
INSTALLATION AND PREDELIVERY BOAT RIGGING Installation Guidelines Install the appropriate remote control following all instructions provided with the remote controlMake sure the following items are checked: Correct length control cables and wiring harnesses Proper type and quality of cables and wiring harnesses Correct routing of cables and harnesses Appropriate slack in front of the outboard for remote control cables Proper routing of cables to prevent kinking Positioning and securing of cables and harnesses along their lengths to prevent movement or damage Typical transom-mounted outboard installations require 12 in(30 cm) cable loop at the front of the outboard when the cables are routed from the side of the splash well